Tack Shooters normally have a short range. But, you can improve their area damage by increasing the number of tacks fired every shot. Although it starts slower than a Dart Monkey, it quickly catches up to a standard Dart Monkey with the addition of more attack speed upgrades.
In many situations, its shorter range can be compensated for by increased attack speed or by increased damage over the range with higher-tier Path 1 upgrades. For instance, in Path 1, Tack Shooter’s tack sprays become area-of-effect damage, increasing its attack speed.
You can improve the Tack Shooter’s projectile dispersion and range by switching to Path 2. To improve the tack density, the third approach calls for more tacks. Crosspathing advantages on most higher-tier improvements have special consequences because they are so different from lower-tier upgrades.
The following photograph was provided by Reddit useru/DontWeDoItInTheRoad. You can joinr/btd6guideif you wish to receive other concepts and images comparable to those displayed above. This article will discuss the “Best Tack Shooter Path in BTD6.” So, let us get started:
Table of Contents
What is the Best Tack Shooter Path in BTD6?
Depending on the path players choose to progress to, the Tack Shooter can employ fire damage instead of dealing with sharp projectiles.You may find a use for any of the Tack Shooters.
The best tack shooter path is “The Tack Zones”. The Tack Zones is one of thebest tack shooter paths in BTD6. Let us discuss more the other paths of Tack Shooter:
1. INFERNO RING
- Price: $38,675
- Path: 1
- Tier: 5
The Inferno Ring is a powerful alternative for destroying both weak and strong bloons. Stronger bloons take damage from its meteor assaults. But, its burning hot flame ring swiftly disposes of the weaker bloons, particularly ZOMG.
Inferno Ring’s longer range and improved area damage make it more useful on more difficult levels, even at a higher cost. Like most Tack Shooter upgrades, Inferno Ring is best placed as close to the track as possible to maximize its devastating flame ring strikes.
Using an Inferno Ring Tack Shooter, players have various cross-pathing options. Which one they choose is up to them. If you choose Path 2, you’ll get 20 pierce for each upgrade. That is frequently the greatest option because it means the Inferno Ring can deliver up to 80 bloons when it shoots.
Although the Inferno Ring already gains a little range with its Path 1 upgrade to tier-5, Path 2 will further boost the Inferno Ring’s range. At the end of Path 3, players will be dealt an additional damage upgrade of 1.
A Tack Shooter’s ability to shred through more bloons is usually preferable to a Tack Shooter’s ability to inflict two damage. That is especially considering how rapidly the Inferno Ring shoots.
2. SUPER MAELSTROM
- Price: $12,750
- Path: 2
- Tier: 5
Super Maelstrom is a low-cost tower with tremendous popping power for popping bloons. It’s an effective and efficient tower. Tack Shooter Race Events are the best place to use the Super Maelstrom ability. In fact, it can fire numerous rounds at once to eliminate the enormous number of bloons that are spawning.
This is a great tower for Pat, who can easily melt dense RBE rounds. Similarly, towers that increase bloon susceptibility, such as Super Brittle, are extremely beneficial to this strategy. The Super Maelstrom Tack Shooter benefits from not necessitating a cross route, as it is primarily intended for usage by the ability.
When using the Super Maelstrom Track Shooter on a cross path, players should only choose Path 1 to increase Tack Shooter’s attack speed. However, because the bloons will be clustered near enough to be hit by most or all of the saw blades, Path 3 does not deliver greater damage.
Also, players commonly combine the Super Maelstrom with Pat Fusty or bloon-freezing structures like the Bomb Shooter or Ice Monkeywith Bloon Crush.
3. THE TACK ZONE
- Price: $17,000
- Path: 3
- Tier: 5
Despite its relatively modest range, the Tack Zone is a highly adaptable tower. The Tack Zone is an extremely potent tower when used with other potent towers. That is because of its high attack rate and high amount of projectiles per shot.
If you place it in an area where there are a lot of MOAB-class bloons, such as a densely populated area with many tight turns, you can still get some serious damage from the frequent waves of tacks sent out at once. The Tack Zone can effectively deal with MOAB-class bloons if all 32 high-damage tacks are aimed at the same target in the middle of the zone.
In order to maximize the potential ofthe Tack Zone, buffs that increase damage, attack speed, penetration, and range should be applied there first. To counter the surge of Super Ceramics, it could use more pierces.
The Tack Zone’s attack pace can be reduced to one shot every 0.1181 seconds. That is, of course, if a player crosses paths with Path 1, which is the only viable way. The Tack Zone gains near-invincibility status when equipped with a Path 1 upgrade.
Even if the range of the Tack Shooter is increased to the point where it can complete the whole circle, the tower will still take a significant amount of damage from the increased range of the Tack Zone.
The Tack Zone’s damage output can be considerably increased by teaming it with an Engineer Monkey equipped with Overclock and an Alchemist Monkey equipped with Stronger Stimulant (4/-/-).
Conclusion
This concludes our guide on the Best Tack Shooter Path inBTD6. What we have discussed in this post can be summed up as follows:
- Using a Path 1 Inferno Ring is a viable option for players who have no defenses against Lead Bloons, except for Camo Bloons and Ceramic Bloons.
- It is possible for Path 2 Super Maelstroms to have a global range with their powers and to tear through all types of bloons, including Lead Bloons, with ease.
- Players should use The Tack Zone to maximize DPS, which fires tacks at an extremely high rate.
So, this is it from our side. If you want more informative articles. Stay Tuned!